Skip to content
Cart

Collection: DSL Line Filters

Compare (0/5)

44 products

TP-Link

TP-Link TX432 10G 2-Port SFP+ Module 2x10Gb Slots

Regular price
Sale price $227.54 Regular price $459.00

TP-Link

TP-Link POE10R Omada 2xGbE PoE Splitter Gigabit RJ45 Port Adapter

Regular price
Sale price $19.65 Regular price $29.00

TP-Link

TP-Link SM5220-3M 3m 10G SFP+ Direct Attach Cable

Regular price
Sale price $48.05 Regular price $59.00

TP-Link

TP-Link POE150S Omada PoE Injector Adapter IEEE 802.3af

Regular price
Sale price $25.33 Regular price $39.00

TP-Link

TP-Link POE10E Omada Fast Ethernet PoE+ Extender 10/100 Mbps RJ45 In Out

Regular price
Sale price $18.51 Regular price $29.00

TP-Link

TP-Link MC100CM 10/100Mbps SC-Type 2KM Multi-Mode Media Converter

Regular price $49.00
Sale price Regular price

TP-Link

TP-Link Omada Gigabit WDM Media Converter MC211CS-20 MC212CS-20

Regular price $59.00
Sale price Regular price

TP-Link

TP-Link Omada Gigabit WDM Media Converter MC211CS-20 MC212CS-20

Regular price
Sale price $33.28 Regular price $49.00

TP-Link

TP-Link Omada Gigabit WDM Media Converter MC211CS-20 MC212CS-20

Regular price
Sale price $34.42 Regular price $49.00

TP-Link

TP-Link Omada Gigabit WDM Media Converter MC211CS-20 MC212CS-20

Regular price
Sale price $43.51 Regular price $59.00

TP-Link

TP-Link POE4818G Omada 48V Passive PoE Injector 1x Gigabit PoE 1x Non-PoE

Regular price
Sale price $21.92 Regular price $29.00

TP-Link

TP-Link EH310 1 to 3 Gigabit Ethernet Splitter

Regular price $49.00
Sale price Regular price

TP-Link

TP-Link POE4824G Omada 48V Passive PoE Injector Adapter 24W PoE Power

Regular price
Sale price $26.47 Regular price $39.00

Alloy

Alloy SFP10G-SLC10 10Gigabit SFP+ Module 1310nm 10KM

Regular price $88.00
Sale price Regular price

TP-Link

TP-Link MC420L Omada 10G Multi-Gigabit SFP Media Converter 1x 1G/2.5G/5G/10G RJ45 Port

Regular price
Sale price $63.95 Regular price $79.00

TP-Link

TP-Link POE260R Omada 2.5G PoE+ Splitter

Regular price
Sale price $28.74 Regular price $38.99

TP-Link

TP-Link SM5110LSB-10 10GBase-BX WDM Bi-Directional SFP+ LC Module

Regular price
Sale price $58.27 Regular price $89.95

TP-Link

TP-Link SM6110-SR Omada 25GBase-SR SFP28 LC Transceiver

Regular price
Sale price $68.50 Regular price $79.00

TP-Link

TP-Link EH210 1 to 2 Gigabit Ethernet Splitter 3 RJ45 Ports Aluminium Case

Regular price
Sale price $28.74 Regular price $39.00

TP-Link

TP-Link POE2412G Omada 24V Passive PoE Injector 1x Gigabit PoE 1x Non-PoE

Regular price
Sale price $19.65 Regular price $29.00

Which DSL line filter do you actually need?

Most PC builders never think about a DSL line filter until their connection starts dropping out, and by then it's usually a cheap passive part causing the headache. A filter is a low-pass circuit. It lets voice frequencies (below roughly 4 kHz) through to your phone and blocks the high-frequency data signal from reaching it. It also stops the phone's electrical load from dragging down the data signal. ADSL2+ uses frequencies up to about 2.2 MHz, while VDSL2 on copper runs much higher, up to 17 MHz on common profiles. That difference is why a filter's rating matters.

Entry-level generic microfilters are fine for a single basic corded phone on a short, clean line. The trade-off is looser component tolerances, so insertion loss and impedance matching vary between units. On a marginal line, that can mean noisier sync and lower attainable speeds.

The sweet spot is a branded filter rated for ADSL2+ and VDSL2. It has better-matched components and more consistent shielding, and those are the things that keep a borderline copper line stable.

The enthusiast option is a central filter or faceplate filter at the first socket. One properly installed unit filters every extension downstream, so you don't have a pile of in-line filters adding joins and connection points. Past that, there's little to buy. Filters are passive, so there's no "faster" tier, only cleaner and more consistent.

It's also worth checking whether you need one at all. On NBN fibre connections (FTTP, HFC and fixed wireless), DSL filters don't apply. On FTTN and FTTC, voice normally runs as VoIP through the modem, so filters only matter if you still have legacy gear on the copper, like a back-to-base alarm, a medical alert unit or an old phone.

Upgrading and technical nuances

The first trap is the type of line you're on. ADSL filters and VDSL-capable filters aren't always interchangeable. A filter built only for ADSL can attenuate the higher VDSL bands, so if you've moved from ADSL to FTTN or FTTC over copper, check the packaging for VDSL2 compatibility. If it doesn't say, assume it doesn't.

The second is placement. The filter goes between the wall and the phone, never between the wall and the modem. Filtering the modem is the classic mistake and it will kill your sync completely. Anything that shares the line needs filtering, including cordless phone bases, fax machines, alarm dialers, and set-top boxes that use a phone line.

The third is the plug type. Australian wall sockets commonly use the 611 style connector, while most modems use RJ11 or RJ45 for the DSL port. Many filters come with the right wall-side plug, but some need an adapter. Each adapter adds another joint, and every extra joint is a small noise risk.

Your modem matters just as much as the filter. A decent modem router such as the TP-Link Archer VX or VR families, or comparable Networking gear from other brands, handles line noise and retraining better than bargain-bin units. If you're planning a high-performance rig for gaming or streaming, stable DSL sync beats raw headline speed, because dropouts cause far more pain in a match than a few Mbps. When you eventually upgrade to a Computers setup or a new build, the line will be the weak link long before the PC is.

Last, if you're on fibre and still seeing a filter in your cupboard, it's doing nothing. Take it out, and keep the gear tidy.

Practical things to check before buying

Start with the physical fit. Wall sockets in older homes can be recessed, and chunky in-line filters sometimes block a neighbouring socket or sit awkwardly behind furniture. A slim faceplate filter avoids that, but needs the right mounting type for your socket.

Check cable length and quality next. Flat, untwisted phone leads pick up interference. Where you can, use short, twisted-pair leads from the wall to your modem, and browse Cables & Connectors for proper RJ11 or RJ45 leads in the lengths you need. Keep the DSL cable away from power bricks, transformers and the back of a PC. If your modem sits next to a Power Supplies heavy tower or a stack of switching adapters, noise can creep in. A bit of separation costs nothing.

Some more gotchas worth running through before clicking buy:

Count how many devices share the line, then buy enough filters for each one, or switch to a central unit if there are more than three.

Look for a clear VDSL2 or ADSL2+ rating on the box rather than vague "universal" claims.

Check that the filter has a pass-through port for the phone and a separate DSL port if you want a splitter-style unit.

Skip filters with visible damage or loose plugs, since a flaky contact can look exactly like a dying line.

Don't daisy-chain filters. One filter per device, directly at the socket.

If the line still drops after fixing all of this, the fault is probably in the wall wiring, the pair in the street, or the node, and no filter will fix that. Talk to your provider before you start throwing money at parts.

Brands and local warranty

Filters themselves are commodity parts, so brand reputation counts mainly for consistent component quality. Look for filters from reputable networking vendors and recognised cabling suppliers, and buy modems from established names like TP-Link, Netgear and D-Link. These companies provide firmware updates and proper support channels, which matters when you're chasing intermittent drops.

Local warranty matters most on the modem, since that's the expensive part. Under Australian Consumer Law you have guarantees regardless of the manufacturer's paperwork, but dealing with a brand that has an Australian service channel is much easier than arguing with an overseas seller. For a few-dollar filter, warranty is a minor factor. Still, buying from an Australian retailer means returns and compatibility advice are simple if your line type turns out to be something you didn't expect.

Frequently asked questions

Do I need a DSL line filter on the NBN?

Only if you're on FTTN or FTTC with legacy devices still on the copper line. For FTTP, HFC and fixed wireless, they aren't used. If your voice service runs as VoIP through the modem, a filter isn't needed for that.

Can I use an ADSL filter on a VDSL connection?

Sometimes, but it's risky. Some ADSL-only filters cut into the higher frequencies VDSL2 uses, which can reduce speeds or cause drops. Buy one clearly rated for VDSL2.

Where does the filter plug in?

Between the wall socket and the device you're filtering, such as a phone or alarm. The modem plugs straight into the wall, or into the DSL port of a splitter-style unit, never through a standard microfilter.

Will a better filter increase my speed?

Not directly. A good filter stops a phone from degrading your line, so it protects the speed you already qualify for. If your line is long or noisy, the filter can't fix that.

Is a central filter better than individual filters?

Usually, yes, for homes with several phone points. It filters everything downstream from one point and removes the extra joints that cheap in-line units add. It does need correct installation, and in many cases a licensed cabler.