Collection: Crucial Solid State Drives

Which Crucial SSD do you actually need?

Most PC builders overthink the headline speed number and underthink what happens once the drive is half full and being hammered. With Crucial solid state drives, the real differences between tiers come down to NAND type, whether there's a DRAM cache, and how the controller handles sustained writes.

At the entry level you've got the BX500 on SATA and the P3 on PCIe 3.0. These use QLC or budget TLC with no DRAM. QLC stores four bits per cell, which means sixteen voltage states to tell apart, so writes are slower and endurance is lower. They hide this with a fast pseudo-SLC cache, but once a big copy fills that cache, speeds can fall to a few hundred MB/s. For a boot drive or a games library that's mostly reads, that's fine. For constant large file work, it isn't.

The sweet spot is the T500 (PCIe 4.0, TLC, onboard DRAM) with the P310 as the cheaper Gen4 option. DRAM holds the flash translation table so the controller doesn't keep hunting for data locations, which keeps random performance consistent when the drive fills up. The P310 skips DRAM and leans on host memory buffer, so it's quick on paper but less steady under heavy mixed loads.

At the top sit the T700 and T705 on PCIe 5.0. Sequential reads more than double Gen4, but game load times and OS responsiveness are governed by low-queue-depth random latency, which barely moves between generations. Diminishing returns hit hard here. Gen5 pays off for huge video scratch disks, large dataset work and heavy file transfers, not for a gaming rig.

Upgrading and technical nuances

The first trap is mixing up interface and form factor. An M.2 slot can be PCIe or SATA, and some older boards only run SATA M.2 in certain slots. Check the manual before you buy. Modern Motherboards on AM5 and LGA1851 typically give you one Gen5 M.2 slot wired to the CPU and extra Gen4 slots, often running through the chipset. A Gen5 drive in a chipset-fed slot drops to Gen4 speeds, and populating certain slots can share lanes and disable SATA ports.

Second, Gen5 drives run hot. A T705 under sustained load can push controller temperatures past 80°C without proper cooling, then throttle. Many boards ship with chunky M.2 heatsinks, and that's usually enough for the T500. For Gen5, use the board heatsink or the Crucial-supplied one if you buy the heatsink version, and watch airflow from your GPU, since a hot graphics card sitting over the slot cooks the drive.

Third, consider the PCIe 3.0 P3 in a modern build. It works, but you're leaving a lot of bandwidth on the table for little saving. If you're upgrading an older system, a Gen4 drive in a Gen3 slot still runs fine, just capped at around 3,500 MB/s, which is plenty to feel the jump from SATA.

For consoles and handhelds, check heatsink height. A PS5 needs a drive with a low-profile heatsink, and most handhelds want single-sided 2230 or 2280 drives, so confirm the length before ordering.

If you're building from scratch, pair your drive choice with the rest of the platform. A CPUs & Processors and Desktop Memory combo that's well matched means the SSD isn't the bottleneck, and you can browse the full Solid State Drives (SSD) range to compare capacities.

Practical things to check before buying

Start with physical fit. Most M.2 drives are 2280 (22mm wide, 80mm long), but some boards only have 2242 or 2260 mounts on secondary slots. Confirm your case has room, and if you're using a Computer Cases model with a tight GPU layout, check whether the primary M.2 slot is hidden beneath a large graphics card. Swapping a drive under a Graphics Cards / GPU shouldn't need you to pull the whole card, so plan placement early.

Heatsink clearance is the next gotcha. Some boards have thick shrouds that don't leave room for a drive with its own aluminium heatsink. Use one or the other, never both stacked, because trapped heat does more harm than good.

Power draw matters less on desktops but is a real consideration on laptops and small form factor builds. Gen5 drives can pull over 10W under load, which adds heat to a small chassis. Good airflow from Fans, Heatsinks & Cooling helps, especially around the M.2 area.

SATA drives like the MX500 still need a SATA data cable and a power connector from your Power Supplies. Check you've got a spare lead, and keep an eye on Cables & Connectors if your modular set is short.

Finally, leave headroom. SSDs perform best with 10 to 20 percent free space, because the controller needs room to shuffle data around. Buy one capacity tier higher than you think you need, particularly with QLC drives.

Brands and local warranty

Crucial is the consumer arm of Micron, which makes its own NAND, so you're not buying a rebadged mystery drive. Micron has been winding down the Crucial consumer line, so stock can vary and it pays to confirm current warranty terms with the retailer. Other reputable names to compare include Samsung (990 series), WD_BLACK, Kingston and Seagate FireCuda.

Genuine Australian warranty matters because SSDs fail without warning, and drives bought through grey imports can be a pain to claim. Under Australian Consumer Law you're entitled to remedies from the seller, and buying locally means a proper RMA process instead of international shipping. Keep your invoice and drive serial number, and back up regardless, because warranty replaces hardware, not your data.

Frequently asked questions

Is a Gen5 Crucial SSD worth it for gaming?

Not usually. Game load times depend more on CPU, decompression and random latency than raw sequential speed. A T500 or similar Gen4 drive feels almost identical in real use and runs much cooler.

Do I need a DRAM cache?

For a boot drive or a workstation, yes, it's worth it for consistent performance. For a secondary games drive, a DRAM-less drive like the P310 is fine.

Will a PCIe 4.0 drive work in an older PCIe 3.0 slot?

Yes, it's backwards compatible, but speeds are capped at Gen3 levels. You'll still get a big jump over SATA.

How much capacity should I buy?

Aim for 1TB as a minimum for modern games, and 2TB if you install lots of big titles. Larger drives also tend to be faster and more durable.

Can I use an NVMe drive in a PS5 or handheld?

Often yes, but check heatsink height and form factor first, and make sure the drive meets the speed requirements for that device.